Skip to main content
Skip table of contents

A-3-3-3 T8 Signal Range [T-Series Datasheet]

The T8 analog inputs have channel-to-channel isolation allowing them to measure across their full range with common mode voltages up to the isolation spec from Appendix A-3-3-1.

Appendix A-3-3-1 has the abbreviated range values, which are also the values used when specifying the desired range. See the table below for the exact nominal ranges. For example, the T8 has a range called ±4.8V, specified for AIN2 by writing AIN2_RANGE=4.8, and the actual nominal range in that case is ±4.884V.

Range

Actual Range

Units

11

11.0[1]

±Volts

9.6

9.768

±Volts

4.8

4.884

±Volts

2.4

2.442

±Volts

1.2

1.221

±Volts

0.6

0.611

±Volts

0.3

0.305

±Volts

0.15

0.153

±Volts

0.075

0.076

±Volts

0.036

0.038

±Volts

0.015

0.019

±Volts

[1] The range is guaranteed to be at least 11 volts. The actual limit will vary between 11 and 11.3 V.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.