2.14 - OEM Connector Options [UE9 Datasheet]
As of this writing, the UE9 is only produced in the normal form factor with screw-terminals and DB connectors, but the PCB does have alternate holes available for 0.1” pin-header installation. See the image under file attachments for an example of UE9 to OEM conversion.
Connectors J2 and J3 provide pin-header alternatives to the DB15 and DB37 connectors.
Table 2.14-1. J2 OEM Pin-Headers
J2 |
|
|
|
1 | GND | 2 | Vs |
3 | CIO0 | 4 | CIO1 |
5 | CIO2 | 6 | CIO3 |
7 | GND | 8 | EIO0 |
9 | EIO1 | 10 | EIO2 |
11 | EIO3 | 12 | EIO4 |
13 | EIO5 | 14 | EIO6 |
15 | EIO7 | 16 | GND |
Table 2.14-2. J3 OEM Pin-Headers
J3 |
|
|
|
|
|
1 | GND | 2 | GND | 3 | PIN20 |
4 | PIN2 | 5 | FIO7 | 6 | FIO6 |
7 | FIO5 | 8 | FIO4 | 9 | FIO3 |
10 | FIO2 | 11 | FIO1 | 12 | FIO0 |
13 | MIO0 | 14 | MIO1 | 15 | MIO2 |
16 | GND | 17 | Vs | 18 | Vm- |
19 | Vm+ | 20 | GND | 21 | DAC1 |
22 | DAC0 | 23 | GND | 24 | AIN13 |
25 | AIN12 | 26 | AIN11 | 27 | AIN10 |
28 | AIN9 | 29 | AIN8 | 30 | AIN7 |
31 | AIN6 | 32 | AIN5 | 33 | AIN4 |
24 | AIN3 | 35 | AIN2 | 36 | AIN1 |
37 | AIN0 | 38 | GND | 39 | GND |
40 | GND |
|
|
|
|
OEM-Friendly Installers
OEM-friendly Software Installers (Windows)
To make deploying OEM LabJacks alongside LabJack software easier, there are two options:
Call the LabJack Basic Installer silently from your own installer
Use the Example LabJack Installer to create your own installer
File Attachment: