WaitLong: IOType = 6

This IOType provides a way to add a delay during execution of the Feedback function. The typical use would be putting this IOType in between IOTypes that set a digital output line high and low, thus providing a simple way to create a pulse. Note that this IOType uses the same internal timer as stream mode, so cannot be used while streaming.

• Time: This value (0-255) is multiplied by a microsecond constant to determine the delay.
  delay constant: U3C = 16384 us, U3B = 16384 us, U3A = 32768 us, U6 = 16384 us.

Example

#WaitLong Feedback command

import u3
d = u3.U3()
d.debug = True
d.getFeedback(u3.WaitLong(Time = 70))
#Sent: [0×47, 0xf8, 0×2, 0×0, 0×4c, 0×0, 0×0, 0×6, 0×46, 0×0]
#Response: [0xfa, 0xf8, 0×2, 0×0, 0×0, 0×0, 0×0, 0×0, 0×0, 0×0]
#[None]